DescriptionParameterFlow capacity 500 L/hInlet water pressure 2..4 barTDS 3000 mg/LInfluent flow demand (service) 650–800 L/hOperating pressure 8..12 barPower consumption 0.7 kWSpecificationEquipmentGrundfos® CM 1-10 pump300 psi membrane vessel2.5 × 10″ sediment prefilterElectrical panel with Ecosoft controllerPiping, instrumentationSteel frameWooden crateOptionsFilmtec™ ХLE-4040 / LCLE-4040 or Ecosoft ELP-4040 membraneConnections:influent water — ¾”permeate — ½”concentrate — ½”Specifications Permeate capacity**: 500 L/hPermeate recovery***: 75%Maximum TDS: 3000 mg/LInfluent flow demand: 650…800 L/h (service)Operation pressure: 8…12 barMaximum pressure: 14 barElectrical requirements: 230 V, 50 Hz (1 ph)Electrical power: 0.7 kWPrefilter rating: 5 μm** depends on feed water TDS, temperature, and permeate recovery *** for low scaling/fouling waterFeed water requirements Influent water temperature: 5… 40 °СResidual chlorine, max: 0.1 mg/LHardness:up to 3 meq/L (150 mg/L CaCO₃)Iron:up to 0.1 mg/LManganese: up to 0.05 mg/LSilicate: up to 20 mg/LChemical oxygen demand, max: 4.0 mg О₂/LHydrogen sulfide: noneThe limitations may be exceeded if using antiscalant, oxygen scavenger, or other RO chemical pretreatment.OC5000 controllerThe OC5000 controller is designed for automatic or manual control of reverse osmosis unit and provides:automatic switching on and off of the equipment upon signal;emergency shutdown of the equipment by signals from dry-running sensors, overpressure in the module;shutdown of equipment on the external STOP signal.ApplicationsSteam boilersHeating and cooling circuitsBreweries and beverage productionLivestock and poultry farmsGlazing factoriesLaundry and car washVideos DownloadsTechnical data sheet Ecosoft MO10000Instruction manual Ecosoft Commercial RO SystemsComparison table
